Engineering, 22.04.2020 02:28 kingk6440

The CIO of the company has asked you as IS Manager to investigate the implementation of a new information system dealing with the handling of customer service. The CIO hands you a very good and extensive list of User Requirements that has been designed through a long analysis process developed with the user areas and asks you to analyze and recommend one of the following implementation options:

a. SaaS (cloud based, multi-tenant)
b. Acquire a packaged, ready-made system from a vendor
c. Develop the system internally with your own resources
d. Any other implementation options.

Briefly describe and analyze the noted options above, with a good list of advantages and disadvantages, and then include your well-detailed recommendation for implementation.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

Answer

You know the right answer?

The CIO of the company has asked you as IS Manager to investigate the implementation of a new inform...

Questions