subject
Engineering, 22.04.2020 02:08 cdubble04

Ethanol is produced in a one-liter batch fermenter by Saccharomyces cerevisiae (yeast). To begin the batch process, glucose and ammonia are added to the reactor, which has been inoculated by the yeast. The reaction produces glycerol and cell mass, in addition to ethanol, carbon dioxide, and water according to the (unbalanced) reaction below. Note that that the mass ratio of glycerol produced to glucose consumed is 0.2556. Also note that the mass ratio of H. O produced to NH, consumed is 1.058 Glucose + Ammonia → Glycerol + Ethanol + Yeast Cell Mass + Carbon Dioxide + Water a CH (8) + b NH(g)}p CH 0 (1) + (CHO) +ỊCH K04 Nụ (8) + $ 0 g) + t H (1) Balance the equation and fill out the table below. (1 point cach, 6 total) a- 1 b = 115 g of NH, are added to the reactor. At the end of the batch, 640 g of ethanol has been produced. How much glucose was added (assume complete conversion of the limiting reactant). mlar B 16 points) BONUS QUESTION USING CHAPTER 4 CONCEPTS: The standard heat of combustion (AHC) for the yeast is-22.1 kJ/mol. In order to maintain a constant temperature, how much heat must be added or removed from the reactor? Both the sign and magnitude of your answer will be graded J 3 points)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
Ethanol is produced in a one-liter batch fermenter by Saccharomyces cerevisiae (yeast). To begin the...
Questions
question
Mathematics, 04.03.2021 05:20
question
Mathematics, 04.03.2021 05:20
question
Mathematics, 04.03.2021 05:20
question
Mathematics, 04.03.2021 05:20
question
Mathematics, 04.03.2021 05:20
Questions on the website: 13722367