Engineering, 22.04.2020 02:16 randallcraig27

A piston-cylinder device contains 6 kg of H2 and 21 kg of N2 at 160 K and 5 MPa. Heat is now transferred to the device, and the mixture expands at constant pressure until the temperature rises to 200 K. Determine the heat transfer during this process by treating the mixture (a) as an ideal gas and [30 points] (b) as a nonideal gas and using Amagat's law [30 points]. Also state your assumptions [10 points]

Answers: 2

Show answers

Answers

Answer from: Quest

answer:

explanation:

Answer from: Quest

yass

Explanation:

thanks

Answer from: Quest

A Carnot heat engine receives heat from a reservoir at 900$^\circ{}$C at a rate of 800 kJ/min and rejects the waste heat to the ambient air at 27$^\circ{}$C. The entire work output of the heat engine is used to drive a refrigerator that removes heat from the refrigerated space at -5$^\circ{}$C and transfers it to the same ambient air at 27$^\circ{}$C. Determine (a) the maximum rate of heat removal from the refrigerated space and (b) the total rate of heat rejection to the ambient air. Answers: (a) 4982 kJ/min, (b) 5782 kJ/min

Answer from: Quest

nitially, the gas is at pressure p_0 ... The diagram shows several possible processes of expansion. ... unusual: They represent the relative change in pressure and in volume. Which of the curves in the figure represents an isothermal process? ... The ideal gas law states that pV = nRT . ... to the final volume R_{\rm v}V_0 .

Untitledwww.livingston.org › cms › lib4 › Centricity › Domain

PDF

The p V-diagram above represents the states of an ideal gas during one cycle of ... During process A B, the volume of the gas increases from V. to 2V, and the gas ... of thermodynamics, determine the work performed by or on the gas during the ... Four samples of ideal gas are each initially at a pressure P. and volume V., ...

What are PV diagrams? (article) | Khan Academywww.khanacademy.org › ... › Laws of thermodynamics

A convenient way to visualize these changes in the pressure and volume is by using a ... As a gas goes through a thermodynamics process, the state of the gas will shift ... How do we determine the sign of the work done from a PV diagram? ... The work done during a thermodynamic process is equal to the area under the ...

chapter 20 entropy and the second law of thermodynamicswww.cabrillo.edu › ~jmccullough › files

PDF

by A Refrigerators

irreversible process that takes a system from an initial state i to a final state f is exactly equal to the entropy change S for any reversible ... volume Vf, the change S in the entropy of the gas is. (20-4). The Second Law of Thermodynamics This law, which is ... ergy extracted as heat from the low-temperature reservoir is con-.

Objective NCERT Xtract Physics for NEET/ JEE Main, Class 11/ ...books.google.com › books

Disha Experts - 2019

A diatomic gas initially at 18oC is compressed adiabatically to one eighth of its original ... 2k mol of hydrogen at NTP expands isobarically to twice its initial volume. ... 109MJ (d) 1.09 MJ When a system is taken from state i to state falong the path iaf, ... What will be the final pressure if an ideal gas in a cylinder is compressed ...

)*nBo"(t)wk.ixueshu.com › file

PDF

adiabatic, constant volume, and constant pressure). Use the heat ... Point i in the figure below represents the initial state of an ideal gas at tempemture T. Taking.

AP* Thermodynamics Free Response Questionswww.marion.kyschools.us › userfiles › Classes › Hando...

PDF

At state 1, the gas has volume 1.50 × 10–3 m3, pressure 1.02 × 105 Pa, and the ... The metal block is removed and the gas expands to state 4 still at 100° C. ... page 3. (c) Indicate below whether the process from state 2 to state 3 is isothermal, ... An ideal gas initially has pressure p0, volume V0, and absolute temperature T0.

Adiabatic Processes for an Ideal Gas – University Physics ...opentextbc.ca › chapter › adiabatic-processes-for-an-id...

work is done on it and its temperature increases; in an adiabatic expansion, the ... where the compressions of the gas-air mixture take place so quickly that there is ... A quasi-static, adiabatic expansion of an ideal gas is represented in (Figure), ... ideal gas makes a quasi-static adiabatic transition from a state with pressure ...

AP B Problems-Thermodynamics - School District of Claytonwww.claytonschools.net › lib › Centricity › Domain

PDF

In terms of p0 and V0 calculate the work done by the gas in the process. b. In terms of p0 and V0 ... Four samples of ideal gas are each initially at a pressure Po and volume Vo, and a temperature To as shown on the diagram above. The samples are taken in separate experiment from this initial state to the final states I, II, III, ...

Qualification Exam: Statistical Mechanicspeople.physics.tamu.edu › abanov

PDF

An adiabatic expansion from pressure P0, volume V0 to a volume 2V0; ... and F (Helmholtz free energy) for a homogeneous system in term of U (internal energy) and the ... Find the net work done in the process in terms of P0, V0. 2. ... The van der Waals equation of state for a mole of gas is given by (P +a/V 2)(V −b) =.

Searches related to An ideal gas is taken from initial state i at pressure P0 and volume V0 to final state f at pressure 2P0 and volume 2V0. The figures below represent four possible processes by which the gas can be taken from state i to state f. For which process is the work done by the gas greatest?

work done by gas changing pressure and volume

pv diagrams

what is the work w done by the gas as it expands isothermally from v0 to fvv0?

pv diagram problems and solutions

adiabatic

isobaric

what type of process does curve oa represent?

pressure vs volume graph

Page Navigation

Footer Links

Killeen, Texas - From your Internet address - Use precise location - Learn more

HelpSend feedbackPrivacyTerms

Explanation:

Another question on Engineering

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

Answer

You know the right answer?

A piston-cylinder device contains 6 kg of H2 and 21 kg of N2 at 160 K and 5 MPa. Heat is now transfe...

Questions