Engineering, 22.04.2020 21:23 genyjoannerubiera

Consider a two-dimensional, laminar flow around a circular cylinder. Using Thwaites' correlation method, determine the separation angle for these two different velocity distributions given below. (a) From potential flow, the velocity distribution is given by, = 2Uo sin(%) U (x) 2Uo sin () (b) From actual experimental measurements by Hiemenz, the velocity distribution is given by, U (x) U(1.814f - 0.271f3 - 0.0471f5) In the equations above, Uo is the free-stream velocity, R is the radius of the cylinder, x is the arc length along the cylinder's surface, and 2 = x/R is the dimensionless arc length.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

Answer

You know the right answer?

Consider a two-dimensional, laminar flow around a circular cylinder. Using Thwaites' correlation met...

Questions