subject
Engineering, 23.04.2020 17:59 thomasbarbusca15

A startup company is selling a new compressor claimed to have an isentropic efficiency of 90% when compressing refrigerant R-134a from saturated vapor at 0.8 MPa to 1.4 MPa. The compressor is said to be adiabatically insulated, requiring a work input of only 9.5 KJ per unit mass of refrigerant flowing. Verify that the specs of the compressor are possible.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
A startup company is selling a new compressor claimed to have an isentropic efficiency of 90% when c...
Questions
question
Mathematics, 19.03.2020 00:25
question
Mathematics, 19.03.2020 00:25
Questions on the website: 13722367