subject
Engineering, 24.04.2020 02:26 QueenMiah16

G An analog voice signal, sampled at the rate of 8 kHz (8000 samples/second), is to be transmitted by using binary frequency shift keying (FSK). The modulator uses two frequencies 1 MHz and 1.2 MHz for signaling the logical bit values 0 and 1. The receiver uses envelope detection. Determine the maximum possible resolution (bits per sample) with which the sampled voice signal can be quantized at the input to the modulator.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
G An analog voice signal, sampled at the rate of 8 kHz (8000 samples/second), is to be transmitted b...
Questions
question
Chemistry, 03.04.2020 23:17
Questions on the website: 13722361