Engineering, 24.04.2020 20:12 leylah0102
A solid stainless steel [G = 105 GPa] shaft that is 1.9 m long will be subjected to a pure torque of T = 65 N*m.
(a) Determine the minimum diameter d required if the shear stress must not exceed 47 MPa and the angle of twist must not exceed 3.7°. Report both the maximum shear stress Ï and the angle of twist Ï at this minimum diameter.
Answers: 3
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
A solid stainless steel [G = 105 GPa] shaft that is 1.9 m long will be subjected to a pure torque of...
English, 21.05.2021 05:20
Social Studies, 21.05.2021 05:20
Mathematics, 21.05.2021 05:20
Mathematics, 21.05.2021 05:20
Mathematics, 21.05.2021 05:20
Advanced Placement (AP), 21.05.2021 05:20
Advanced Placement (AP), 21.05.2021 05:20
Chemistry, 21.05.2021 05:20
Mathematics, 21.05.2021 05:20
Social Studies, 21.05.2021 05:20