Engineering, 25.04.2020 02:59 anyar

A NC drill press is to perform a series of through-hole drilling operations on a 1.75 in thick aluminum plate that is a component in a heat exchanger. Each hole is 3/4 in diameter. There are 100 holes in all, arranged in a 10 by 10 matrix pattern, and the distance between adjacent hole centers (along the square) = 1.5 in. The cutting speed = 300 ft/min, the penetration feed (z-direction) = 0.015 in/rev, and the traverse rate between holes (x-y plane) = 15.0 in/min. Assume that x-y moves are made at a distance of 0.50 in above the work surface, and that this distance must be included in the penetration feed rate for each hole. Also, the rate at which the drill is retracted from each hole is twice the penetration feed rate. The drill has a point angle = 100°. Determine the time required from the beginning of the first hole to the completion of the last hole, assuming the most efficient drilling sequence will be used to accomplish the job.

Answers: 1

Show answers

Answers

Answer from: rireneb

The total time required is $T_{total}= 1601 sec$

Explanation:

From the question we are told that the

The thickness of the aluminium plate is $t = 1.75 \ in$

The diameter of the holes is $d = \frac{3}{4} \ in$

The number holes is n = 100

The pattern they arranged is = 10 by 10 matrix

The distance between the adjacent holes is $D = 1.5 \ in$

The cutting speed $v = 300 \ ft/min =300 *12 = 3600 \ in /min$

The penetration feed is $P = 0.015 \ in / rev$

The traverse rate is $T_r = 15.0 \ in /min$

The distance of the x-y moves $L = 0.50 \ in$

The rate at which the drill id retracted is R = 2P

The point angle of the drill is $\theta = 100^o$

Generally the cutting speed is mathematically represented as

$v = \pi d N$

Where N is the rotational speed

Substituting values

$3600 = \pi * \frac{3}{4} N$

=> $N = \frac{3600}{0.75 * 3.142 }$

$N = 1527.68 rev /min = \frac{1527.68}{60} = 25.46 \ rev /sec$

Now the feed rate is mathematically represented as

$Feed \ Rate [F] = P * N$

Substituting values

F = 0.015 * 25.46

$= 0.3819 \ in$

Next is to obtain the approach distance

The approach distance is mathematically represented as

$a = 0.5 * d * tan (90 - \frac{\theta }{2} )$

substituting values

$a = 0.5 * 0.75 * tan ({90 - \frac{100}{2} })$

$a = 2.5646 \ in$

also we are told that the drill x-y moves is 0.5 in above the work surface

Then the when retracting the drill the total distance moves is

Hence the total drill distance is w = 0.5 + 1.75 + 0.3146

$= 2.5646 \ in$

The time required to drill on hole is

$t_1 = \frac{w }{F }$

Substituting values

$t_1 = \frac{2.56446}{0.3819}$

= 6.71 sce

The retracting rate of the drill would be

K = 2P N

R = 0.015 * 2 * 25.46

= 0.7638

The time required to move the drill out of one hole is

$t_ 2 = \frac{w}{K}$

Substituting value

$t_2 = \frac{2.5646}{0.7638}$

$= 3.3576 \ sec$

The time required to move from one hole to another is

$t_3 = \frac{D}{T_r}$

$= \frac{1.5}{0.25}$

$= 6 \ sec$

The time it would take to perform the drilling of 100 holes is mathematically represented as

t_4 = 100 *t_1

= 6.71 *100

$= 671 \ sec$

Time required for retracting the drill from 100 holes is mathematically represented as

t_5 = 100 * t_2

t_5 = 3.3576 *100

= 336 sec

The time taken to move through the 100 holes is

t_6 = number of travers time * t_3

The number of trans verse time is = 99

t_6 = 99 * 6

$= 594 \ sec$

The time required the drilling task from the beginning of the first hole to the hole is

$T_{total } = t_4 + t_5 + t_6$

= 671 + 336 + 594

$T_{total}= 1601 sec$

Answer from: Quest

d would be the most obvious choice to this question. leaders are supposed to herd their underlings like a shepherd to sheep. a leader should also listen to others when they are talking to one other to gain a better understanding of their mission and surroundings.

explanation:

Answer from: Quest

answer:

try looking it up that is always

explanation:

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

A NC drill press is to perform a series of through-hole drilling operations on a 1.75 in thick alumi...

Questions