Engineering, 06.05.2020 08:29 ericchen4399
A compressible clay layer 10 m thick has an initial void ratio in situ of 1.026. Test and computations show the final void ratio of the clay layer after construction of a simple framed structure is 0.978 plus or minus 0.001. Determine the estimated primary consolidation settlement of the structure. Analyze total and differential settlement to be expected assuming one end settles to 0.979 and the other end settles to 0.977. Does this simple framed structure fall within the differential and/or maximum permissible settlement assuming a length between the footings of 25 m?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 19:20
List 3 options on how to reduce knocking problens during engine process,
Answers: 2
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
Engineering, 06.07.2019 03:10
Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj
Answers: 3
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
You know the right answer?
A compressible clay layer 10 m thick has an initial void ratio in situ of 1.026. Test and computatio...
Questions
Mathematics, 12.09.2019 04:30
Spanish, 12.09.2019 04:30
English, 12.09.2019 04:30
History, 12.09.2019 04:30
Mathematics, 12.09.2019 04:30
Mathematics, 12.09.2019 04:30
Mathematics, 12.09.2019 04:30
Physics, 12.09.2019 04:30
Computers and Technology, 12.09.2019 04:30
Mathematics, 12.09.2019 04:30
