subject
Engineering, 06.05.2020 07:03 kluke7170

A water main is to be laid to supply water to a subdivision located 2 miles from a water tower. The water level inside the tower is 150 ft above ground, and the subdivision consumes a maximum of 10,000 gpm of water. Assume schedule 40 new commercial steel pipe. The pressure above the water in the tank is 1 atm, and the water pressure at the subdivision is 30 psig: (a) What size (calculate the diameter in inches as well as the recommended standard nominal pipe diameter in inches) pipe should be used for the water main if you ignore the kinetic energy change? (b) After ignoring the kinetic energy change, validate whether this was a good assumption.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
A water main is to be laid to supply water to a subdivision located 2 miles from a water tower. The...
Questions
question
Chemistry, 28.06.2021 09:10
question
History, 28.06.2021 09:10
question
English, 28.06.2021 09:10
Questions on the website: 13722363