Engineering, 06.05.2020 07:10 txayrion

An oven has a wall made of three materials (materials A, B, and C) lined one after the other. The inside of the oven has an air temperature of 200˚C, with a convective heat transfer coefficient of 10 Wm-2 K-1 . Material A is in immediate contact with this hot air, with a thickness of 0.2 m, and a thermal conductivity of kA = 45 Wm-1 K-1 . Material B has an unknown thickness (LB), with a thermal conductivity of kB = 1 Wm-1 K-1 . Material C is 0.1 m thick with a thermal conductivity of kC = 10 Wm-1 K-1 . If you measure the outer surface temperature of the material C as Ts,2 = 20˚C and the outer surface temperature of material A as Ts,1 = 170˚C, estimate the thickness of material B (LB).

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

You know the right answer?

An oven has a wall made of three materials (materials A, B, and C) lined one after the other. The in...

Questions