Engineering, 06.05.2020 07:38 tori829
A smelter emits SO2 at a rate of 10,000 kg/day. The stack is 200 m tall and the plume rise is 100 m. The windspeed is 2 m/s at a height of 10 m and it is an overcast day. Estimate the ground-level SO2 concentration in units of µg/m3. a. 6000 m directly downwind b. 6000 m downwind and 300 m off the centerline
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
A smelter emits SO2 at a rate of 10,000 kg/day. The stack is 200 m tall and the plume rise is 100 m....
Questions
Arts, 28.09.2019 01:10
Mathematics, 28.09.2019 01:10
Mathematics, 28.09.2019 01:10
Social Studies, 28.09.2019 01:10
History, 28.09.2019 01:10
Mathematics, 28.09.2019 01:10
English, 28.09.2019 01:10
Computers and Technology, 28.09.2019 01:10
Computers and Technology, 28.09.2019 01:10
