Engineering, 06.05.2020 05:02 tidwellboston

A storm water system is being designed for a new residential/downtown area being considered. For this subdivision compute the: a) maximum potential retention (in inches); b) direct runoff (in inches); and c) total volume of runoff (ft3 ). Assume normal moisture conditions for 8 inches of rainfall on the 20- acre development. The hydrologic soil group is a mixture of 60% Group B and 40% Group C throughout the watershed. The land use for the subdivision is split three ways; 90% is equally made up of 1/8-acre lots and commercial business areas, and the remainder is used for paved streets. If the original area was split evenly between a meadow and a pasture in poor condition, what were the original maximum potential retention (inches); direct runoff (inches); and c) total volume of runoff (ft3 ). What is the level of urbanization that has occurred due to the place of the new subdivision?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 06.07.2019 03:20

What is the maximum height from which a mass of 30 kg can fall on to a flange on the lower end of a vertical rod of length 1.0 m and diameter 20 mm, the upper end being rigidly fixed, if the stress in the rod is not to exceed 80 mpa? the tensile modulus of the rod is 200 gpa.

Answers: 3

Answer

Engineering, 06.07.2019 03:20

What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa

Answers: 1

Answer

You know the right answer?

A storm water system is being designed for a new residential/downtown area being considered. For thi...

Questions