An ocean thermal energy conversion (OTEC) system is being proposed for electric power generation using a Rankine cycle with ammonia as the working fluid. The system is to be used in a location where the oceanic water temperature near the surface is approximately 20oC, while the temperature at a reasonable depth below the surface is approximately 15oC. Consider a power plant that is to generate 2 MW of electricity. For the specified conditions determine the:

(a) Maximum possible thermal efficiency for this cycle if the ammonia enters the turbine as a saturated vapor.
(b) Mass flow rate of ammonia through the system.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency