Engineering, 06.05.2020 00:28 wendybhenry61391

Problem 1: Experts on hypothermia tell us that heat loss from the body is much greater in 10°C water than in air at the same temperature. To test this, assume that heat transfer from a person can be approximated as that from a vertical cylinder of diameter D = 0.3 m and length L = 1.8 m, with a constant surface temperature of 37°C. Assuming that heat losses from the cylinder occur only at the lateral surfaces, calculate the ratio of the heat transfer rate from the cylinder to water to that for the cylinder to air. Data for the heat transfer properties for water and air can be found in the Appendix in Tables A.2-11 and A.3-3, respectively, and appropriate correlations can be found in eqns (4.7-4), and Tables 4.7-1 and 4.7-2. What do you conclude from this about your odds of survival if you fall into a cold water lake/ocean? (Hint: neglect the cylinder height restriction in Table 4.7-1).

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

You know the right answer?

Problem 1: Experts on hypothermia tell us that heat loss from the body is much greater in 10°C water...

Questions