This is a multi-part question. Once an answer is submitted, you will be unable to return to this part As steam is slowly injected into a turbine, the angular acceleration of the rotor is observed to increase linearly with the time t Know that the rotor starts from rest at t = 0 and that after 10 s the rotor has completed 20 revolutions.

Determine the angular velocity at t20 s. (You must provide an answer before moving on to the next part)

The angular velocity is [ ] rpm.

What precautions should you take to prevent injuries when dealing with heavy loads?

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater