subject
Engineering, 05.05.2020 18:00 Crxymia

Shi et al. (2013) measured the diffusivity of fluorescein (MW = 332), a fluorescent tracer, in the porcine temporomandibular joint (TMJ) disk using a technique known as fluorescence recovery after photobleaching (FRAP). The TMJ disk consists mostly of water and a large amount of type I collagen. The overall average diffusivity of fluorescein in the TMJ disk was found to be 57.0 μm2 s−1. Using the Brinkman model, estimate the value of κ for fluorescein diffusion in the porcine TMJ disk.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
question
Engineering, 04.07.2019 19:20
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
question
Engineering, 04.07.2019 19:20
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
You know the right answer?
Shi et al. (2013) measured the diffusivity of fluorescein (MW = 332), a fluorescent tracer, in the p...
Questions
question
Mathematics, 18.03.2021 02:40
question
Arts, 18.03.2021 02:40
question
Mathematics, 18.03.2021 02:40
Questions on the website: 13722367