A museum has three rooms, each with a motion sensor (m0, m1, and m2) that outputs 1 when motion is detected. At night, the only person in the museum is one security guard who walks from room to room. Using the combinational design process, create a circuit that sounds an alarm (by setting an output A to 1) if motion is ever detected in more than one room at a time (i. e., in two or three rooms), meaning there must be an intruder or intruders in the museum.

a. Describe the behavior of this problem with a truth table.

b. Find the minimal logic expression based on the truth table. You can use either K-map or Boolean algebra.

c. Construct the gate-level circuit schematic using the logic expression derived in problem b.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.