Engineering, 05.05.2020 08:32 angelica19carmona

Bulk wind shear is calculated by finding the vector difference between the winds at two different heights. Using the supercell wind profile you identified, calculate the 0-1 km and 0-6 km bulk wind shear values. This means we will find the difference between the surface wind (lowest wind barb on the sounding) and the speed of the wind at 1 km and 5 km. The atmospheric pressure at 1 km above sea level is typically very close to 850 mb. The pressure at 6 km above sea level is very close to 500 mb. Please calculate the 0-1 km and 0-6 km wind shear values in knots (kts). For simplicity, assume that the surface winds are due south easterly, the 850 mb winds are due southerly, and the 500 mb winds are due westerly. Show your work.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

You know the right answer?

Bulk wind shear is calculated by finding the vector difference between the winds at two different he...

Questions