The beam supports the load of P = 9kip. As a result, the A992 steel (E = 29 × 103ksi) member BC is subjected to a compressive load. Due to the forked ends on the member, consider the supports at B and C acts as pins for x-x axis buckling and as fixed supports for y-y axis buckling. Determine the factor of safety with respect to buckling about each of these axes.

Fluids at rest possess no flow energy. a)- true b)- false

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.