Engineering, 05.05.2020 04:01 heavendl13

To calculate average and total power supplied by a wye-configured source as well as the average and total power delivered to a wye-configured load. A balanced, three-phase, wye-connected generator with positive sequence has an impedance of 0.18+ȷ0.51 Ω/ϕ and an internal voltage of 120 V/ϕ. The generator feeds a balanced, three-phase, wye-connected load having an impedance of 32+ȷ22 Ω/ϕ. The impedance of the line connecting the generator to the load is 0.8+ȷ1.9 Ω/ϕ. The a-phase internal voltage of the generator is specified as the reference phasor.
Required:
1) Calculate the average power per phase delivered to the wye-connected load.
2) Calculate the total average power delivered to the load.
3) Calculate the average power lost in the line.
4) Calculate the total average power lost in the generator.
5) Calculate the total number of magnetizing vars absorbed by the load.
6) Calculate the total complex power delivered by the source.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

You know the right answer?

To calculate average and total power supplied by a wye-configured source as well as the average and...

Questions