Engineering, 06.05.2020 01:36 gabrielduboy
A cone-shaped part is to be fabricated using laminated object manufacturing. The radius of the cone at its base = 35 mm, and its height = 50 mm. Layer thickness = 0.20 mm. The laser beam can cut the sheet stock at a velocity of 200 mm/s. Compute an estimate for the time (in seconds) required to build the part, if 20 s are lost each layer to lower the height of the platform that holds the part and advance the sheet stock in preparation for the next layer. Ignore cutting of the cross-hatched areas outside of the part since the cone should readily drop out of the stack owing to its geometry. Setup time for the job = 25 min.
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:10
Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]
Answers: 3
A cone-shaped part is to be fabricated using laminated object manufacturing. The radius of the cone...
Mathematics, 21.11.2019 23:31
Social Studies, 21.11.2019 23:31
Mathematics, 21.11.2019 23:31
Mathematics, 21.11.2019 23:31
Computers and Technology, 21.11.2019 23:31
History, 21.11.2019 23:31
Mathematics, 21.11.2019 23:31
English, 21.11.2019 23:31
Social Studies, 21.11.2019 23:31
Chemistry, 21.11.2019 23:31
Social Studies, 21.11.2019 23:31
English, 21.11.2019 23:31