Engineering, 06.05.2020 01:40 faithyholcomb

Is saturated vapor. Compression in the compressor is not isentropic with the refrigerant leaving the compressor and entering the condenser at 60o C and 1000kPa. Refrigerant leaving the condenser and entering the expansion valve is saturated liquid. Find the following: (a) power consumption in the compressor (kW), (b) rate of heat addition to the evaporator (kW), (c) condenser heat rejection rate (kW), (d) cycle coefficient of performance, (e) compressor isentropic efficiency, (f) entropy generation rate in the expansion valve (kW/K), and (g) the irreversibility rate in the expansion valve in kW if the ambient temperature i

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

You know the right answer?

Is saturated vapor. Compression in the compressor is not isentropic with the refrigerant leaving the...

Questions

SAT, 25.11.2021 09:20

Calculate the average speed of the moon around the earth. The moon has a period of revolution of 27. 3 days and an average distance from the earth of...