Engineering, 06.05.2020 02:38 sophiaa23
In plating a continuous strip of steel 0.9 m wide with Sn from an acid solution (valence charge=2), the desired strip speed is 500 m/min., current efficiency is 100%, and the thickness of tin plate is to be 0.4 μm (on each side) at a current density of 5000 A/m2. How long must the plating tank be assuming that the strip passes straight through the tank with no returns or bends? (density of Sn=7.31 g/cc, atomic weight of Sn=118.7).
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
In plating a continuous strip of steel 0.9 m wide with Sn from an acid solution (valence charge=2),...
Questions
Social Studies, 03.03.2021 04:10
English, 03.03.2021 04:10
Mathematics, 03.03.2021 04:10
Health, 03.03.2021 04:10
Mathematics, 03.03.2021 04:10
Mathematics, 03.03.2021 04:10
Chemistry, 03.03.2021 04:10
Mathematics, 03.03.2021 04:10
Arts, 03.03.2021 04:10
