An air standard cycle with constant specific heats is executed in a closed pistoncylinder system and is composed of the following four processes: 1-2 Isentropic compression 2-3 Constant volume heat addition 3-4 Isentropic expansion with a volume ratio, r1=V4/V3 4-1 Constant pressure heat rejection with a volume ratio, r2=V4/V1 (a) Sketch the P-v and T-s diagrams for this cycle. (b)Find out T2/T1 as a function of k, r1, r2 only. (c) Find out T4/T1 as a function of k, r1, r2 only. (d)Find out T3/T4 as a function of k, r1, r2 only. (e) Find out T3/T2 as a function of k, r1, r2 only. (f) Obtain an expression for the back work ratio for a fixed minimum-tomaximum temperature ratio T1/T3. The expression should be of a function of T1/T3, k, r1, r2 only. (g)Obtain an expression for the cycle thermal efficiency as a function of k, r1, r2 only.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?