A phase angle in the frequency domain corresponds to

a. the initial slope of the sinusoidal signal.

b. the angle at which measurements should be taken for the most accurate results.

c. a delay or advance in time as compared to a pure cosine wave.

d. the angle of the approach vector of the voltage.

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2