Engineering, 07.05.2020 00:13 hamaama
A Pitot-static probe is used to measure the speed of an aircraft flying at 6000 m. If the differential pressure reading is 3600 N/m2, determine the speed of the aircraft in m/s. The density of air at an altitude of 6000 m is 0.66 kg/m3. The speed of the aircraft is m/s.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
A Pitot-static probe is used to measure the speed of an aircraft flying at 6000 m. If the differenti...
Questions
Mathematics, 19.05.2020 20:06
Mathematics, 19.05.2020 20:07
Physics, 19.05.2020 20:07
History, 19.05.2020 20:07
Mathematics, 19.05.2020 20:07
Mathematics, 19.05.2020 20:07
Mathematics, 19.05.2020 20:07
