subject
Engineering, 07.05.2020 14:01 bayloann3928

Water flows steadily through a section of piping in a heat exchanger at a constant pressure of 1.5 bar, entering as a vapor and exiting as a liquid. One side of the pipe is maintained at 400K and receives 20 kJ/s of energy by heat transfer, while the other side of the pipe is maintained at 800K and rejects 40 kJ/s of energy by heat transfer. Is this process possible, impossible, or indeterminate from the information given

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
Water flows steadily through a section of piping in a heat exchanger at a constant pressure of 1.5 b...
Questions
question
Mathematics, 10.04.2020 22:29
question
Physics, 10.04.2020 22:29
question
Mathematics, 10.04.2020 22:29
Questions on the website: 13722360