Engineering, 13.05.2020 04:57 hbhdnjdndj1867

Consider a catchment that has a total area of 2.1 acres. Runoff from the entire catchment flows into one pipe inlet. Part of the catchment is a softball field (1.5 ac) and the other part is a set of paved tennis courts (0.6 ac). The softball field has a C value of 0.3 and a time of concentration of 7 minutes, and the paved area has a C value of 0.95 and a time of concentration of 2 minutes. The IDF curve is given by i =100/(tc + 10) where i is in in/hr and tc is in minutes. Determine the design storm intensity and flow rate for the following cases: (a) The usual method based on the entire drainage area contributing to flow. (b) A modified method that assumes that only the paved tennis courts contribute to flow. (c) A different modified method that assumes a time of concentration of 2 minutes, and an approximation that the entire tennis court region contributes flow and 2/7 of the softball region contributes flow. Comment on the results and their impact on design. Is it always best to use method (a)

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal

Answers: 3

Answer

You know the right answer?

Consider a catchment that has a total area of 2.1 acres. Runoff from the entire catchment flows into...

Questions