subject
Engineering, 19.05.2020 20:05 ladnerhailey16

Consider a one-inlet, one-exit control volume operating at steady state. Air enters at 200 lb/in2 , 1040◦R and expands adiabatically to 50 lb/in2 . You may assume that the air acts as an ideal gas and that changes in kinetic and potential energy effects are negligible. Determine the rate of entropy production, in Btu/8R per 1b of air flowing in following cases.

Consider the following two different cases.
a. In the first case, the control volume only encloses a turbine with an isentropic efficiency of 75%.
b. In the second case, the control volume only encloses a throttling valve.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
Consider a one-inlet, one-exit control volume operating at steady state. Air enters at 200 lb/in2 ,...
Questions
question
Mathematics, 29.08.2019 05:30
Questions on the website: 13722362