subject
Engineering, 21.05.2020 00:06 arthurdolz

(30 pts) A simply supported beam with a span L=20 ft and cross sectional dimensions: b=14 in; h=20 in; d=17.5 in. is reinforced with tension steel As=5 in2 . The beam supports a uniformly distributed dead load (including its own weight) DL=2.2 kips/ft and a uniformly distributed live load LL=1.8 kips/ft. The properties of the materials are as follows: f’c=4000 psi, steel fy=60,000 psi. Calculate the long-term deflections in the beam after five years.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 19:20
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
question
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
question
Engineering, 06.07.2019 02:30
In a unit cell of fcc structure, indicate the position of one of the tetrahedral interstitial sites by plotting the corresponding tetrahedron. do the same for one of the octahedral interstitial sites (in a separate fcc unit cell). mark the positions of all the tetrahedral and octahedral interstitial sites in the unit cells. how many equivalent tetrahedral sites and how many equivalent octahedral sites are contained in a fcc unit cell, respectively. what is the coordination number for a tetrahedral site and what is the coordination number for an octahedral site?
Answers: 2
You know the right answer?
(30 pts) A simply supported beam with a span L=20 ft and cross sectional dimensions: b=14 in; h=20 i...
Questions
question
English, 19.11.2020 08:00
question
Business, 19.11.2020 08:00
question
Chemistry, 19.11.2020 08:00
question
Mathematics, 19.11.2020 08:00
question
Business, 19.11.2020 08:00
Questions on the website: 13722362