Engineering, 21.05.2020 00:05 Ezekielcassese
Water is to be heated from 10°C to 80°C as it flows through a 2 cm internal diameter, 13 m long tube. The average flow rate of water is 5 L/min. Find average velocity of water and the convection heat transfer coefficient. The water is heated using an electric resistance heater (in the tube) which provides uniform heating throughout the surface of the tube. The outer diameter of the tube is well insulated, such that in steady operation all the heat generated in the heater is transferred to the water in the tube. Assume turbulent flow for Re > 5000 for this problem
Answers: 2
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Water is to be heated from 10°C to 80°C as it flows through a 2 cm internal diameter, 13 m long tube...
English, 22.01.2021 02:10
Mathematics, 22.01.2021 02:10
Mathematics, 22.01.2021 02:10
Mathematics, 22.01.2021 02:10
Mathematics, 22.01.2021 02:10
English, 22.01.2021 02:10
Biology, 22.01.2021 02:10
Geography, 22.01.2021 02:10
Social Studies, 22.01.2021 02:10
Mathematics, 22.01.2021 02:10
Mathematics, 22.01.2021 02:10
Chemistry, 22.01.2021 02:10