Engineering, 20.05.2020 05:58 robyn88
Consider flow in between two parallel plates located a distance H from each other. Fluid flow is driven by the bottom plate moving to the right with a velocity of U (note, NO pressure gradient). The top plate has a fixed temperature of TT and the bottom plate has a temperature of Tb. Starting with the governing equations for incompressible flow, find the velocity profile and the temperature profile for the flow in between the plates. In addition, what is an expression for the heat flux at the bottom plate (assuming a thermal conductivity of k)
Answers: 1
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Consider flow in between two parallel plates located a distance H from each other. Fluid flow is dri...
Social Studies, 20.11.2020 01:00
English, 20.11.2020 01:00
Law, 20.11.2020 01:00
Spanish, 20.11.2020 01:00
History, 20.11.2020 01:00
Computers and Technology, 20.11.2020 01:00
Mathematics, 20.11.2020 01:00
Social Studies, 20.11.2020 01:00
Mathematics, 20.11.2020 01:00
Mathematics, 20.11.2020 01:00
Social Studies, 20.11.2020 01:00
Social Studies, 20.11.2020 01:00