Engineering, 21.05.2020 18:04 gujaratif932

A heated plate is built into the wall of a large room. The room is maintained at 300 K. The exposed surface of the plate is maintained at 400 K by a heater attached to the back of the plate. Assume the sides of the plate and back of the heater are perfectly insulated. The exposed surface of the plate (area 0.1 m^2 ) has an emissivity of 0.3 and a convection heat transfer coefficient of 6 W/m^2K with the room and air temperature of 300 K. Show resistance circuit for this problem and draw a picture to show relevant heat modes on system to receive full points. Calculate the following:

a. Find the net radiant heat flux from the plate surface, q1"=
b. The required heater power, P=
c. The radiosity of the plate surface, J1=

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

You know the right answer?

A heated plate is built into the wall of a large room. The room is maintained at 300 K. The exposed...

Questions