Engineering, 22.05.2020 19:57 alexsince4835
An etchant was used to electively etch the grain boundaries. Mention whether these grain boundaries would appear brighter or darker after etching when observed through optical microscope and explain the reason for such appearance.
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
An etchant was used to electively etch the grain boundaries. Mention whether these grain boundaries...
English, 26.06.2019 21:10
Mathematics, 26.06.2019 21:10
History, 26.06.2019 21:10
History, 26.06.2019 21:10
Advanced Placement (AP), 26.06.2019 21:10
Mathematics, 26.06.2019 21:10
History, 26.06.2019 21:10
Mathematics, 26.06.2019 21:10