Engineering, 27.05.2020 21:09 ciscodahchamp

Plz, help!!

Examine the scenario. A positively charged conductor is brought in contact with a neutral conductor. Which choice most accurately describes the motion of charge between these two objects?

1. The protons in the neutral object are attracted to the charged object. Some of the protons move from the charged object to the neutral object, resulting in two positively- charged objects.

2. The electrons in the neutral object are attracted to the charged object. Some of the electrons move from the neutral object to the charged object, resulting in two positively charged objects.

3. The protons in the charged object are attracted to the neutral object. Some of the protons move from the charged object to the neutral object. Finally, the neutral object becomes positively charged, while the initially charged object becomes neutral.

4. The electrons in the neutral object are attracted to the charged object. Some of the electrons move from the neutral object to the charged object. Finally, the neutral object becomes positively charged, while the initially charged object becomes neutral.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

Answer

You know the right answer?

Plz, help!!

Examine the scenario. A positively charged conductor is brought in contact w...

Questions