A power hacksaw used to cut metal, Link 5 pivots at O5 and its weight forces the saw-blade against the workpiece while the linkage moves the blade (link 4) back and forth within link 5 to cut the part. a. Sketch its kinematic diagramb. Determine its mobility and its type (i. e. is it a fourbar, a watts sixbar, a stephenson’s sixbar, or what?)c. Use reverse linkage transformation to determine its pure revolute-jointed equivalent linkage

Two microscope slides are placed horizontally, one on top of the other, with a drop of a dishwashing liquid between them. the gap between the slides is 1 mm. a machine pulls the top slide to the right with a velocity of 0.15 millimeters per second while the bottom slide is held stationary. a stress gage indicates that a shearing stress of 0.5 pa is required to pull the top slide with this velocity. if the dishwashing liquid adheres to both slides during this process, what is the viscosity of the liquid? specify whether your answer is dynamic or kinematic viscosity, and use appropriate units.

At what temperature does the mole fraction of no reach 0.010 for the equilibrium products resulting from the combustion of gasoline and air at 1.0 and 5000 kpa?

Calculate the equilibrium concentration of vacancies per cubic meter in pure aluminum at 500°c. assume that the energy of formation of a vacancy in pure aluminum is 0.76 ev. what is the vacancy fraction at 650°c.