subject
Engineering, 28.05.2020 20:57 sg3635939

A straight and non-moving linear vortex of the initial circulation 0 is submerged into a viscous fluid of viscosity  and density  , thus kinematic viscosity of  (think about a straight tornado just formed in air). Due to the viscous effects, the vorticity surrounding this vortex  evolves in time as a function of the above-mentioned parameters, the radial distance from the vortex center r and time t , i. e. 0  =  f r t ( , , , )  . 1. Using the concepts of dimensional analysis, find a dimensionless form of this function f. 2. Using the concept of self-similarity, find the self-similar form of this function f. 3. Explain why it is beneficial for an experimentalist to establish this form of self-similar function without solving Navier-Stokes equations or experimental measurements.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A straight and non-moving linear vortex of the initial circulation 0 is submerged into a viscous fl...
Questions
question
Mathematics, 03.03.2021 20:40
question
Mathematics, 03.03.2021 20:40
question
Mathematics, 03.03.2021 20:40
question
Mathematics, 03.03.2021 20:40
question
Mathematics, 03.03.2021 20:40
Questions on the website: 13722359