Please I need help with this:
Methane gas can be burned according to the following reactions:<...
Engineering, 29.05.2020 03:58 coolkitty35
Please I need help with this:
Methane gas can be burned according to the following reactions:
CH4 + 2 O2 =CO2 + 2 H2O (1 )
2 CH4 + 3 O2 = 2 CO + 4 H2O (2)
If a reactor is fed with 100 mol/h of methane.
a) What would be the theoretical or stoichiometric O2 flow rate, if the combustion in the reactor is complete (only reaction 1 occurs)?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
Questions
History, 12.09.2019 20:10
Social Studies, 12.09.2019 20:10
History, 12.09.2019 20:10
Biology, 12.09.2019 20:10
English, 12.09.2019 20:10
Mathematics, 12.09.2019 20:10
Arts, 12.09.2019 20:10
History, 12.09.2019 20:10
