Engineering, 31.05.2020 22:58 cody1097

0 0.000573
1E-04 0.000896
0.0002 0.000251
0.0003 0.000735
0.0004 0.000412
0.0005 0.000573
0.0006 0.000735
0.0007 0.000573
0.0008 0.000573
0.0009 0.000573
0.001 -0.000232
0.0011 0.00154
0.0012 0.000412
0.0013 0.000735
0.0014 0.000735
0.0015 0.000573
0.0016 0.000735
0.0017 0.000735
0.0018 0.000896
0.0019 0.000412
0.002 0.001863
0.0021 0.000251
0.0022 0.000251
0.0023 0.00154
0.0024 -7.11179E-05
0.0025 0.000412
0.0026 0.000896
0.0027 0.001057
0.0028 0.000573
0.0029 0.000573
0.003 0.000251
0.0031 9.00277E-05
0.0032 0.000573
0.0033 0.000735
0.0034 0.000573
0.0035 0.000573
0.0036 0.000896
0.0037 0.000412
0.0038 0.000735
0.0039 0.000251
0.004 0.000573
0.0041 0.000573
0.0042 0.000412
0.0043 9.00277E-05
0.0044 0.000573
0.0045 0.000412
0.0046 0.000412
0.0047 0.013626
0.0048 0.151406
0.0049 -0.000232
0.005 0.047789
0.0051 -0.011674
0.0052 0.030547
0.0053 0.208613
0.0054 0.032803
0.0055 0.146571
0.0056 0.032803
0.0057 0.156885
0.0058 0.183796
0.0059 0.171066
0.006 0.108863
0.0061 0.172838
0.0062 0.194593
0.0063 0.245676
0.0064 0.197816
0.0065 0.187986
0.0066 0.265336
0.0067 0.250027
0.0068 0.275649
0.0069 0.239069
0.007 0.278389
0.0071 0.32786
0.0072 0.301271
0.0073 0.299821
0.0074 0.338335
0.0075 0.345264
0.0076 0.368308
0.0077 0.352355
0.0078 0.373948
0.0079 0.403116
0.008 0.398442
0.0081 0.402471
0.0082 0.425676
0.0083 0.436795
0.0084 0.440663
0.0085 0.446142
0.0086 0.452426
0.0087 0.473536
0.0088 0.464834
0.0089 0.480466
0.009 0.484655
0.0091 0.489329
0.0092 0.502059
0.0093 0.499964
0.0094 0.509633
0.0095 0.519141
0.0096 0.522364
0.0097 0.53445
0.0098 0.539767
These are value.

0 0.000573 1E-04 0.000896 0.0002 0.000251 0.0003 0.000735 0.0004 0.000412 0.0005 0.000573 0.0006 0.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

Engineering, 04.07.2019 19:10

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

Answer

You know the right answer?

0 0.000573
1E-04 0.000896
0.0002 0.000251
0.0003 0.000735
0.0004 0.000412

Questions