Engineering, 06.06.2020 01:57 helpmeplease519
A cylindrical rod of copper originally 16.0 mm indiameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A cold-worked yield strength in excess of 250 MPa and a ductility of at least 12%EL are desired. Furthermore, the final diameter must be 11.3 mm. Explain how this may be accomplished.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:20
The quality is zero at a)-the saturated vapour state b)-the saturated liquid state c)-the saturated liquid-vapour mixture state d)-none of the states in the other answers
Answers: 3
You know the right answer?
A cylindrical rod of copper originally 16.0 mm indiameter is to be cold worked by drawing; the circu...
Questions
Mathematics, 28.02.2021 18:50
Spanish, 28.02.2021 18:50
Chemistry, 28.02.2021 18:50
Mathematics, 28.02.2021 19:00
Mathematics, 28.02.2021 19:00
Mathematics, 28.02.2021 19:00
Social Studies, 28.02.2021 19:00
Mathematics, 28.02.2021 19:00
Social Studies, 28.02.2021 19:00
Mathematics, 28.02.2021 19:00
German, 28.02.2021 19:00
