subject
Engineering, 06.06.2020 16:58 ansonferns983

A double-threaded Acme stub screw of 3-in. major diameter is used in a jack having a plain thrust collar of 4-in. mean diameter. Coefficients of running friction are estimated as 0.10 for the collar and 0.15 for the screw. a. Determine the pitch, lead, thread depth, mean pitch diameter, and helix angle of the screw. b. Estimate the starting torque for raising and for lowering a 6000-lb load. c. If the screw is lifting a 6000-lb load at the rate of 4 ft/min, what is the screw rpm

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
A double-threaded Acme stub screw of 3-in. major diameter is used in a jack having a plain thrust co...
Questions
question
Mathematics, 04.12.2020 21:30
question
SAT, 04.12.2020 21:30
question
Mathematics, 04.12.2020 21:30
Questions on the website: 13722361