A planar supersonic nozzle with area ratio A/A∗ = 1.7 is connected to a reservoir with p0 = 150 psia. The exit flow is uniform and in the direction θ1 = 0◦ . Outside the nozzle, the ambient pressure is pa=14.7 psia and the velocity is zero. (a) Characterize the wave phenomenon that occurs at the nozzle exit (expansion or compression?)
(b) Find the direction of the slipstream, θ2, immediately downstream of the exit

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way