Engineering, 06.06.2020 21:02 brutusjohnson1
An air conditioning system consists of a spray section followed by a reheater. Moist air at 32 C and 77% relative humidity enters the system and passes through a (COLD!) liquid water spray, leaving the spray section cooled and saturated with water. The moist air is then heated to 25 C and phi=45 % with no change in the amount of water vapor present. For operation at steady state, determine A. the temperature of the moist air leaving the spray section, in degree C. B. the change in the amount of water vapor contained in the moist air passing through the system, in kg per kg of dry air. Locate the principal states on a psychrometric chart.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
You know the right answer?
An air conditioning system consists of a spray section followed by a reheater. Moist air at 32 C and...
Questions
History, 27.12.2020 05:40
Mathematics, 27.12.2020 05:40
History, 27.12.2020 05:40
Computers and Technology, 27.12.2020 05:50
Mathematics, 27.12.2020 05:50
Computers and Technology, 27.12.2020 05:50
Mathematics, 27.12.2020 05:50
