Engineering, 07.06.2020 00:00 Hellokittyjam35

A liquid food product is processed in a continuous flow sterilizer. The liquid enters the sterilizer at a temperature and flow rate of Tm, i,h=20C, mdot = 1kg/s, respectively. A time-at-temperature constraint requires that the product be held at a mean temperature of Tm=90C for 10s to kill bacteria, while a second constraint is that the local product temperature cannot exceed Tmax = 230C in order to preserve a pleasing taste. The sterilizer consists of an upstream, Lh=5m heating section characterized by uniform heat flux, an intermediate insulated sterilizing section, and a downstream cooling setion of length Lc=10m. The cooling section is composed of uninsulated tube exposed to a quiescent environment at Tinfinity=20C. The thin-walled tubing is of diameter D = 40mm. Food properites are similar to those of liquid water at T=330K. Find: (a) Healt flux required in heating section to ensure a maximum mean product temperature of Tm=90C (b) Location and value of the maximum local product temperature (c) Minimum length of the sterilizing section needed to satisfy the time-at-temperature constraint.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

You know the right answer?

A liquid food product is processed in a continuous flow sterilizer. The liquid enters the sterilizer...

Questions