Engineering, 10.06.2020 18:57 edwin3448

As an engineer working for CableComm you are assigned to work on a project that involves moving 90 people to the 10th floor of a building (Schuylkill View) in Philadelphia. This space is overflow from another building in Philadelphia (CableComm1) that is completely full. The 10th floor will be on its own network segment. All 90 people will have desktop computers and IP phones. A DHCP server will be installed on the 10th floor. A network engineer provides you the following information about available networks (subnets) that can be used for this project. LocationSubnet/maskGateway addressCableComm1 8th floor10.10.0.0/2310.10.0.1CableComm 1 9th floor10.10.2.0/2410.10.2.1Available 10.10.3.010.10.4.1CableComm1 10th floor10.10.4.0/2410.10.6.1CableComm 1 10th floor (Reserved)10.10.5.0CableComm1 11th floor10.10.6.0/24Available10.10. 7.0Available10.10.8.0Available10.10 .9.0(5) Define the network that suit the needs for the 90 people in the same format used above. Schuylkill View 10th floor(5) Include the range of dynamic IP addresses that will be available to the 10th floor.(5) Explain how you arrived at your answer.(5) Describe an additional role that could be configured on the DHCP server

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

As an engineer working for CableComm you are assigned to work on a project that involves moving 90 p...

Questions