Engineering, 11.06.2020 23:57 michibabiee
The pressure and velocity at the inlet are 100 kPa and 2 m/s, respectively. The pump exit is located 4 m above the same datum. The pressure and velocity are 500 kPa and 3 m/s, respectively. How much power is required to drive this pump assuming and efficiency of 75%
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
The pressure and velocity at the inlet are 100 kPa and 2 m/s, respectively. The pump exit is located...
Questions
Mathematics, 19.01.2021 05:40
Chemistry, 19.01.2021 05:40
Mathematics, 19.01.2021 05:40
History, 19.01.2021 05:40
History, 19.01.2021 05:40
Physics, 19.01.2021 05:40
Chemistry, 19.01.2021 05:40
Advanced Placement (AP), 19.01.2021 05:40
Social Studies, 19.01.2021 05:40
Mathematics, 19.01.2021 05:40
Health, 19.01.2021 05:40
Arts, 19.01.2021 05:40
