subject
Engineering, 12.06.2020 00:57 caitlinsanders

If the turbulent velocity profile of water in a pipe of diameter 0.6 m may be approximated by where u is in m/s and y is in m, and 0.15 m from the u=(yR)17pipe wall the velocity is 2.7 m/s, estimate the wall shear stress and volumetric flow rate.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
question
Engineering, 06.07.2019 03:10
Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c
Answers: 1
question
Engineering, 06.07.2019 04:10
Steam enters a converging-diverging nozzle at 1.0 mpa and 500°c with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kpa. assuming the flow through the nozzle to be isentropic, determine: the exit area and (a) (b) the exit mach number
Answers: 2
question
Engineering, 06.07.2019 04:10
Water flows at the rate of 200 i/s upwards through a tapered vertical pipe. the diameter at marks(3) clo5) the bottom is 240 mm and at the top 200 mm and the length is 5m. the pressure at the bottom is 8 bar, and the pressure at the topside is 7.3 bar. determine the head loss through the pipe. express it as a function of exit velocity head.
Answers: 3
You know the right answer?
If the turbulent velocity profile of water in a pipe of diameter 0.6 m may be approximated by where...
Questions
question
Chemistry, 09.09.2021 04:10
question
Mathematics, 09.09.2021 04:10
question
Chemistry, 09.09.2021 04:10
question
Mathematics, 09.09.2021 04:10
question
English, 09.09.2021 04:10
question
Mathematics, 09.09.2021 04:10
Questions on the website: 13722363