subject
Engineering, 12.06.2020 19:57 theannakittler7327

If the cord is subjected to a horizontal force of P N =150 , and the gear is supported by a fixed pin at O, determine the angular velocity of the gear and the velocity of the 20 kg gear rack in 4 s , starting from rest. The mass of the gear is 50 kg and it has a radius of gyration of 125 o k mm = . Assume that the contact surface between the gear rack and the horizontal plane is smooth. Hint: Do this as two free bodies. Similar to how we did the two gears in class

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
If the cord is subjected to a horizontal force of P N =150 , and the gear is supported by a fixed pi...
Questions
Questions on the website: 13722367