subject
Engineering, 16.06.2020 23:57 nellydeb7736

As a space probe approaching the planet Venus on a parabolic trajectory reaches Point A closest to the planet, its velocity is decreased to insert it into a circular orbit. Knowing that the mass and the radius of Venus are 4.87 × 1024 kg and 6052 km, respectively, and given that a= 310 km, determine the time needed for the space probe to travel from B to C. (Round the final answer to two decimal places.)

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
As a space probe approaching the planet Venus on a parabolic trajectory reaches Point A closest to t...
Questions
question
Mathematics, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
English, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
Biology, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
History, 13.09.2020 07:01
question
Chemistry, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
English, 13.09.2020 07:01
question
Geography, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
English, 13.09.2020 07:01
question
English, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
question
Mathematics, 13.09.2020 07:01
Questions on the website: 13722367